Playing ● NOT CONNECTED
Effect Rainbow 60 fps 64 LEDs ~0 mA est.
Next cue: — save a cue below to get started —  •  ESP Wi-Fi • 192.168.4.1

Quick Looks

Live Rainbow Matrix — 8 × 8 • 64 LEDs

Settings

Dark / Light
Set-safe lock

Share & sketch

Admin

Board

Connect to GCP-Prop-01

  1. Point your camera at this code and tap Join.

Send to your ESP32

Boards

Download firmware Firmware v8.2 · gcp-prop-firmware.bin
  1. Download the firmware.
  2. Flash it to the new board at 0x0 with esptool: PORT=$(ls /dev/cu.usbserial-* | head -1); esptool --chip esp32 --port "$PORT" --baud 460800 write-flash 0x0 gcp-prop-firmware.bin
  3. Power the board, join its Wi-Fi (GCP-Prop-01), open its /setup page, name it (GCP-Prop-02…) and join your router if you use one.
  4. Back here: add the board in the boards list above and tick Link.
ESP Wi-Fi picked — address 192.168.4.1. Changes will send automatically; Test connection checks the board is there.

Light format

Matrix size

Frame rate

Power

Stops the board rebooting on bright looks while it's on USB power.

Segments

Segment 2 — second effect

Segment 3 — third effect

Segment shape — how the split is laid out

On a strip or ring, only Even split and Alternating apply.

Split matrix — smaller matrices inside this one

Effect library

Controls

180
0 ms

MotionSpeed + Density together

1.0×
50%

ColourLive grade

100%
0°
100%
5600K
1800K · candlelight5600K · neutral — no tint7500K · cool blue
35%
Main colour
Second colour

Letters & shapes

A–Z, 0–9 and . , ! ? - * # — anything else draws as a space.

Cues

Loop
Plays from: First cue

No cues yet — the starter cues above are real cues: tap GO, edit, or delete them like any cue.

Custom Controller — Remote

Build mode: tap a button to edit it.

Remote sends over: ESP Wi-Fi • 192.168.4.1