Flash it to the new board at 0x0 with esptool:
PORT=$(ls /dev/cu.usbserial-* | head -1); esptool --chip esp32 --port "$PORT" --baud 460800 write-flash 0x0 gcp-prop-firmware.bin
Power the board, join its Wi-Fi (GCP-Prop-01), open its /setup page, name it (GCP-Prop-02β¦) and join your router if you use one.
Back here: add the board in the boards list above.
Board
Motors
No motors yet.
No moves saved.
No cues saved.
Save move
Remove motor
Save cue
Attach remote
Remote links are set over Wi-Fi β switch the transport to set links.
No remotes imported yet. In Remote Library, Share a remote, then import it here.